Create this project yourself with sheet material cut to size by TOSIZE.fr!

Ingolf

Average

2 minutes

Description

After the successful completion of my kitchen fronts project (see elsewhere on this page) it started to itch again! Fortunately, the Ikea cabinet where the TV was placed was too ugly ... So time for a new Audio Video furniture. Now exactly tailored!

Audio furniture with its own design

I wanted to make a simple cupboard with a slender and luxurious look. This entire cabinet consists of 5 parts. 4 boards mitered on all sides from 18 mm MDF and 1 center support from 30 mm MDF. The center support is fixed at the top and bottom with screws, all other connections only with wood glue. After gluing, the inside is primed and painted in gray. I provided the outside with real wood veneer and then put it in oil. I ordered the veneer from AliExpress ... but that's not recommended. It is too thin to process properly. If you want to do this too: don't go for the budget option like I did! Veneering is time consuming and precise work, but not difficult. Cover the MDF completely with wood glue, let it dry (30-45 minutes) and if you actually think: now it does not stick anymore ... then put the veneer on it, take an iron at a fairly low temperature and iron it firmly. Just put a piece of paper between the iron and the wood. After that, it's just a matter of trimming. The end result is great!